TRAMP METAL REMOVAL MAGNETS

Fan Cooled

Oil Cooled
OUR FAN-COOLED SELF-CLEANING ELECTRO-MAGNET SPECIFICATION:
Tramp Removal Magnets
Overband Heavy Duty Fan-Cooled Electromagnets have the following features and scopes of supply:
- Newest, most modern, advanced design.
- Most Energy Efficient magnet available.
- Environmentally friendly – No more Transformer Oil at all – no possibility of leaks.
- Much Smaller (dimensions) and Lighter (mass) than older oil cooled types.
- Extremely low fire hazard – suitable for underground and surface installations.
- Rain-proof due to full fixed position s/s304 louvers on air intake and exit sides.
- Easy access to fans – no need to remove Belts or Pulleys – simply remove side Louvers.
- Standardized dimensions – spare parts readily available ex stock.
- Machined contact casing and core parts.
- Aluminium coils with a cross section of 12mm x 5mm double glass insulated, space wound with class H (180 deg C) and F (155 deg C) layer insulation.
- 3 x Fans (1,1kW) – 5750m/h approx – site VAC 3ph, for blowing only.
- Foot mounted heavy duty geared motor drive.
- Four continuously crowned Carbon Steel Pulleys with locking elements and Plumber Block Bearings.
- Heavy duty belt with our unique s/s304 slat fastener system to always wipe Metal off Magnet face, no vulcanised slats to tear off. Reinforcing is available as an extra.
- Pulleys are supported on heavy channel framework.
- Magnet design is the result of 40 years experience in the design and application of magnetic separators and we continually improve our technology.
- Magnet temperature rise and magnetic field strength is optimised.
- Our equipment requires minimal maintenance and spares.
- Fans need to be connected and monitored to ensure long-life and to keep warrantee.
OUR OIL COOLED SELF-CLEANING ELECTRO-MAGNET SPECIFICATIONS:
Overband Heavy Duty Oil-Cooled Electromagnets have the following features and scopes of supply:
- Machined contact casing and core parts.
- Aluminium coils with a cross section of 12mm x 5mm double glass insulated space wound with Class “H” and “C” layer insulation.
- Oil circulation tank (invented by Mechani Mag) with oil inlet port level gauge, leak proof terminal box and moisture trap.
- Foot mounted, heavy duty, geared motor drive.
- Four continuously crowned pulleys with locking elements and Plummer Block Bearings.
- Heavy duty belt with our unique Slat / Fastener Joint System to always wipe metal off Magnet face (no vulcanised slats to tear off). Special reinforcing is available as an extra.
- Pulleys are supported on heavy channel framework.
- Both the Magnet Housing and the Convection Tank are fitted with vertical fins to effectively increase the cooling surface area.
- The Magnet design is the result of more than 40 years experience in the design and application of Magnets and we are continually improving our technology.
- Magnet temperature rise and magnetic field strength is optimised.
- Our equipment requires minimal maintenance and spares.
ADVANTAGES OF FAN-COOLED MAGNETS OVER OIL-COOLED TYPES:
FAN-COOLED ELECTROMAGNETS are:
- Cleaner (more environmentally friendly – no oil!)
- More efficient – fans cool more effectively than the oil.
- Much lighter mass – spare parts are much lighter too.
- Smaller in size.
- Easier to maintain.
- Easier to install.
- Fans are essentially motors – easy to monitor/maintain/repair/replace.
- NEW – easy side access to fans – no need to remove belt/pulleys etc…
- Fixed position s/s louvers cover fans – rain proof!
- No possibility of oil leaks.
– ZERO fire hazard – suitable for underground and surface areas